PERMATEX INDUSTRIAL CORPORATION 07/02/97
ROCKY HILL, CONNECTICUT 06067
TELEPHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET Page 01 of 05

Ultra Copper(R) High Temp. RTV Silicone
81878

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Name: Ultra Copper(R) High Temp. RTV Silicone
Gasket Maker 101BR
Item No.: 81878
Part No.: 101BR
Product Type: RTV Silicone

2. COMPOSITION, INFORMATION ON INGREDIENTS


Ingredients CAS No. %

Poly(dimethylsiloxane),
hydroxy terminated 70131-67-8 55-60
Poly(dimethylsiloxane),
dimethyl 63148-62-9 20-25
Modified silicon dioxide 68611-44-9 5-10
Vinyl oximinosilane 2224-33-1 5-10
IRON OXIDE 1309-37-1 1-3
SILICA, MICA 12001-26-2 1-3
Substituted urea 23843-64-3 1-3
Methyl ethyl ketoxime Proprietary ***


***When this product is exposed to moisture, 5-10% methylethylketoxime
may be formed.


Ingredients which have exposure limits

Exposure Limits (TWA) ACGIH OSHA OTHER
Ingredients (TLV) (PEL)

Modified silicon dioxide 10 mg/m3 6 mg/m3 6 mg/m3
IRON OXIDE 5 mg/M3 (Fe) 10 mg/M3 (Fe) None
particulate
SILICA, MICA 3 mg/m3 TWA 3 mg/m3 TWA None
respirable dust respirable dust
Methyl ethyl ketoxime None None 3 ppm TWA
10 ppm STEL

Exposure Limits (STEL) ACGIH OSHA
Ingredients (TLV) (PEL)













PERMATEX INDUSTRIAL CORPORATION 07/02/97
ROCKY HILL, CONNECTICUT 06067
TELEPHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET Page 02 of 05

Product Name: Ultra Copper(R) High Temp. RTV Silicone
Gasket Maker 101BR
Item No.: 81878

3. HAZARDS IDENTIFICATION

Toxicity: Eye and skin irritant. May be irritating by
inhalation. Moderately toxic by ingestion. When
heated to temperatures above 300°F (150°F) in the
presence of air, this product can form
formaldehyde vapors. Formaldehyde is a potential
cancer hazard and a known skin and respiratory
sensitizer. Vapors irritate eyes, nose and throat.
Safe handling conditions may be maintained by
keeping vapor concentrations below the OSHA
permissible limit for formaldehyde.
Primary Routes of Entry: Skin or eye contact; inhalation; ingestion.
Signs and symptoms
of Exposure: Methyl ethyl ketoxime and methanol vapors
produced during cure are toxic and irritates eyes,
nose, and throat.
Existing Conditions
Aggravated by Exposure: Mica: respiratory conditions.

Literature Referenced Carcinogen
Ingredients Target Organ and Other Health Effects NTP IARC OSHA

Poly(dimethylsiloxane),
hydroxy terminated No Data NO NO NO
Poly(dimethylsiloxane),
dimethyl IRR NO NO NO
Modified silicon dioxide No Data NO NO NO
Vinyl oximinosilane No Data NO NO NO
IRON OXIDE AC4 ALG LUN NO N/A NO
SILICA, MICA LUN NO NO NO
Substituted urea No Data NO NO NO
Methyl ethyl ketoxime ALG BLO CNS IRR NO NO NO
-------------------------------------------------------------------------------

Abbreviations

N/A Not Applicable AC4 ACGIH-Unclassifiable as human carc.
ALG Allergen BLO Blood
CNS Central nervous system IRR Irritant
LUN Lung


4. FIRST AID MEASURES

Ingestion: Do not induce vomiting. Keep individual calm.
Obtain medical attention.
Inhalation: Remove to fresh air. If symptoms persist, obtain
medical attention.







PERMATEX INDUSTRIAL CORPORATION 07/02/97
ROCKY HILL, CONNECTICUT 06067
TELEPHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET Page 03 of 05

Product Name: Ultra Copper(R) High Temp. RTV Silicone
Gasket Maker 101BR
Item No.: 81878

4. FIRST AID MEASURES (continued)

Skin Contact: Wipe off paste with paper towel or cloth. Wash
with soap and water.
Eye Contact: Flush at least 15 minutes with water. Obtain
medical attention.

5. FIRE FIGHTING MEASURES

Flash Point: More than 200°F Method: Tag Closed Cup
Recommended
Extinguishing Agents: Carbon dioxide, foam, dry chemical
Hazardous Products formed
by Fire or Thermal Decomp Formaldehyde, silica fume, oxides of carbon.
Unusual Fire or
Explosion Hazards: None

Explosive Limits:
(% by volume in air)Lower Ferric oxide: 2.6%
(% by volume in air)Upper Ferric oxide: 12.5%

6. ACCIDENTAL RELEASE MEASURES

Steps to be taken in case
of spill or leak: Wipe or scrape up spilled material. Maintain
good ventilation for large spills. Place scrap
material in a well ventilated place and allow to
cure to rubber.

7. HANDLING AND STORAGE

Safe Storage: Store in a dry area below 90°F.
Keep container closed when not in use.
(Contact Loctite Customer Service 1-800-243-4874 for shelf Life information)
Handling: Avoid skin or eye contact. Keep away from eyes.
Avoid prolonged breathing of vapors.

8. EXPOSURE CONTROLS, PERSONAL PROTECTION

Eyes: Safety glasses or goggles.
Skin: Rubber or plastic gloves.
Ventilation: Sufficient to maintain vapor concentration
below TLV.

See Section 2 for Exposure Limits.











PERMATEX INDUSTRIAL CORPORATION 07/02/97
ROCKY HILL, CONNECTICUT 06067
TELEPHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET Page 04 of 05

Product Name: Ultra Copper(R) High Temp. RTV Silicone
Gasket Maker 101BR
Item No.: 81878

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Copper paste
Odor: Mild
Boiling Point: Not Applicable, Polymeric
pH: 7-8
Solubility in Water: Polymerized
Specific Gravity 1.05
Volatile Organic Compound
(EPA Method 24) 5.3%; 56 grams per liter
Vapor Pressure: Less than 5mm at 70°F
Vapor Density: 3.0
Evaporation Rate
(Ether = 1) Not available

10. STABILITY AND REACTIVITY

Stability: Stable
Hazardous Polymerization: Will not occur
Incompatibility: Strong oxidizers. Polymerized by contact with
moisture.
Conditions to Avoid: Not available
Hazardous Decomposition
Products (non-thermal): Methyl ethyl ketoxime

11. TOXICOLOGICAL INFORMATION

See Section 3.

12. ECOLOGICAL INFORMATION

No data available

13. DISPOSAL CONSIDERATIONS

Recommended methods of
disposal: Cured rubber can be incinerated following EPA and
local regulations.
EPA Hazardous Waste
Number NH - Not a RCRA Hazardous Waste Material

14. TRANSPORTATION INFORMATION

DOT (49 CFR 172)
Domestic Ground Transport
Proper Shipping Name: Unrestricted
Hazard Class or
Division: Unrestricted
Identification Number: None







PERMATEX INDUSTRIAL CORPORATION 07/02/97
ROCKY HILL, CONNECTICUT 06067
TELEPHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET Page 05 of 05

Product Name: Ultra Copper(R) High Temp. RTV Silicone
Gasket Maker 101BR
Item No.: 81878

14. TRANSPORTATION INFORMATION (continued)

Marine Pollutant: None
IATA
Proper Shipping Name: Unrestricted
Class or Division: Unrestricted
UN or ID Number: None

15. REGULATORY INFORMATION

CA Proposition 65: Warning: This product contains a chemical known to
the State of California to cause birth
defects or other reproductive harm.

16. OTHER INFORMATION

Estimated NFPA(R) Code:
Health Hazard: 1
Fire Hazard: 1
Reactivity Hazard: 0
Specific Hazard: Does not apply

Estimated HMIS(R) Code:
Health Hazard: 1
Flammability Hazard: 1
Reactivity Hazards: 0
Personal Protection: See Section 8.

NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.

Prepared By: Stephen Repetto
Title: Research Chemist, Health and Safety
Company: Loctite Corp., 1001 Tr Br Cr, Rocky Hill CT 06067
(24hr.) Phone: (860) 571-5100
Revision Date: April 15, 1997 Revision: 0036